Model : R40G RADIAL DRILL MACHINES
Introducing our 40mm capacity all geared fine feed Radial drilling machine the most preferred tool room machine, and even capable of doing a 50 mm drill in a tool room application.
Key Features:
- 905 mm Center Distance
- 9 Spindle speeds with single speed motor
- Hardened Gears
- Hardened & Ground Spindle, RAM, Pinion
- 170 mm Column Diameter
- Longer Gun Metal Nut for Lifting of Arm
All other R40 Series Features
Oil bath Gear Box:
The all new design of gear box in model PMW-R40AA,R40G and P40AA is having 9 speed with all 9 gear made up of hardened NiCr steel up to HRC 50-55. Oil bath gear box and hardened gears give very long life to the machine. Rotation and easy sliding of gears in bearings gives very high reliability. Gear are internally six splined and shaft are externally splined
All the gears in gearbox are machined on imported WMW Germany make gear shaper.
All the splines in the gear box are machined on imported PFAUTER Germany make spline milling machine.
Specifications:
| Description | R40G | |
| CAPACITY | Drilling in M.S. | 40 |
| Drilling in C.I. | 45 | |
| Tapping in M.S. | 20 | |
| Rough Boring in M.S. | —- | |
| DRILL HEAD | Spindle Travel | 250 |
| Spindle Hole taper | MT-4 | |
| Spindle Speeds (RPM x steps) | 70-1225 x 9 | |
| Diameter of RAM | 78 | |
| Spindle Autofeed Ranges | Fine Feed | |
| WORKING RANGE | Max/Min Dist. Spindle nose to base | 850/250 |
| Max/Min Dist. Spindle center to column | 905/385 | |
| Max. Drilling Radius | 990 | |
| Machine Measurement (LxBxH) | 1350x850x1825 | |
| Diameter of Column | 170 | |
| Work Table | 300x300x385 | |
| All for sides useful | ||
| Coolant Tank in-built in Base | —— | |
| POWER | Drill Head Motor | 1.5 HP /960 RPM |
| Lifting Motor | 0.5 HP / 1440 RPM | |
| Lifting Motor V- belt | B-23/B-24 |
